Description

Itaka Work and Positioning Harness. 

The Itaka is an extremely light and comfortable harness made with ample padding to guarantee maximum comfort. The upper part is completely removable and can be disconnected via the small connector. It is equipped with three anchor points (ventral, sternal, and dorsal) and two lateral positioning rings, which can be locked in the closed position to prevent accidental entanglement. The waistbelt is equipped with two large gear loops and four textile loops for directly connecting tool bags. There are two other passages for captive insertion of gear-holding connectors. Two loops on the shoulder straps where the Diapason system can be connected for vertical recovery. A rear attachment ring is positioned high on the back. The harness is equipped with NFC chip to facilitate product traceability and to speed up periodic inspections. Accessories included: two special textile gear holder loops that can be placed on the shoulder straps or on the belt, removable with velcro.

Sizing Chart